Pin Type Spring
End Type Plain
Head Type Plain
Shaft Type Slotted
End Shape Chamfered
System of Measurement Inch
Material 1050-1095 Spring Steel
Diameter 1/8"
Length 5/8"
For Hole Diameter 0.125"-0.129"
Wall Thickness 0.028"
Min. Hardness Rockwell C43
Breaking Strength 1,800 lbs.
Specifications Met ASME B18.8.2
RoHS RoHS 3 (2015/863/EU) Compliant
REACH REACH (EC 1907/2006) (01/16/2020, 205 SVHC) Compliant
Country of Origin United States
Also known as roll, tension, split, and expansion pins, these pins have a slot along one side that you squeeze closed to install them into unthreaded holes. Once installed, they expand slightly, creating outward tension that holds them tight against the hole wall. These pins absorb shock and vibration in your system, and keep parts from loosening. They are often used as hinge pins, or to hold springs and power transmission components in place.
Install these pins into a hole slightly smaller than the pin diameter. They have at least one chamfered end, which means the end is angled to make insertion easier.
Breaking strength is measured as double shear, which is the amount of force required to break a pin into three pieces.
Steel pins are strong and wear resistant.
Pins that meet ASME B18.8.2 specifications are made to ASME standards for material and dimensions.
